Etac Molift Mover 180 Operatör El Kitabı - Sayfa 7
Kaldırma Sistemleri Etac Molift Mover 180 için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Etac Molift Mover 180 16 sayfaları. Electric patient lift
Ayrıca Etac Molift Mover 180 için: Hızlı Başlangıç Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (6 sayfalar)
Sayfayı Yazdır
Lifting and moving
The suspension must always be placed crossways
the person who is being lifted.
Make sure that the sling is fastened securely
on all four hooks of the suspension so that the
person in the sling does not slip or fall out.
When moving the patient, they must sit low-down,
if possible with their feet placed on the base, or
so that their centre of gravity is as low as possible.
This will reduce the risk of instability and/or tipping
over. The lift should also be moved with the legs
as wide spread as possible to achieve maximum
stability.
When moving the patient, stand to the side of the
person you are lifting. Make sure that arms and legs
do not obstruct the lift, seat, bed, etc. Keep eye
contact with the patient to help them feel safe.
When moving the patient, take care to avoid
collisions with objects and furniture in the room.
Avoid thick carpets, high door sills, uneven
surfaces and any other obstacles which may mean
the wheels get jammed. If the lift is pushed over
obstacles, it may become unstable and tip over.
The lift is designed to move patients over
short distances only; it is not a replacement
for wheelchairs or similar.
BM08101 Molift MOVER 180 English - Rev C 19.12.2013
Using the leg adjustment function
Use a wide leg setting when necessary, e.g. to get
round (wheel)chairs, toilets, etc.
The leg adjustment mechanism has a safety
function to prevent the legs from hurting the
patient when they are being lifted from the floor;
the motor shuts down in the event of any unusually
fast change to the leg setting. If this happens, press
the opposite button to re-start the leg adjustment
motor.
Page 7 of 16