Amerlux GRUV - 1.5 - GB-LED Інструкція з монтажу Посібник з монтажу - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Освітлювальне обладнання Amerlux GRUV - 1.5 - GB-LED. Amerlux GRUV - 1.5 - GB-LED 6 сторінок.
Друкувати сторінкуAMERLUX
LIGHTING SOLUTIONS
Assembling Continuous Rows-
Housing Assembly
Reflector removal
(only required to access driver)
WARNING: Electrostatic and polarity sensitive device.
Use caution while handling and wiring.
1.) LED Fixture:
Consult Amerlux for LED maintenance.
2.) LED Replacement:
For LED board replacement reference 689-0500 Instruction Sheet
3.) Driver maintenance:
Drivers are located on tray beneath bottom reflectors,
secured by (2) #8 pal nuts per driver.
Remove the reflector mounting screws to access.
For driver replacement, please specify:
Manufacturer, Model No, and Current Setting (
See 710-0134 Wiring Schematic for more details.
MAKE SURE TO DISCONNECT ALL ELECTRICAL CONNECTIONS BEFORE ACCESSING LED .
Amerlux, LLC. - 178 Bauer Drive, Oakland NJ 07436 - T: 973-882-5010 - F: 973-882-2605
INSTALLATION INSTRUCTIONS
R
ADAPT. ABILITY.
TM
SHEET #:
Joining the Housings
Line up the two housings by using the
alignment splines. Secure them
together by using the Snap and Latch
System on the top of the extrusion.
mA).
www.amerlux.com
689-0512 (2 of 5)
Driver tray
#8 pal nut
AMX P/N 625-0059
(2) per driver
Driver
Reflector
#4-40 self-tap screws
AMX P/N 622-2019
(4) per reflector
Snap-in Lens