DORANI DORVT Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Домофонна система DORANI DORVT. DORANI DORVT 8 сторінок. Touch video intercom system
Також для DORANI DORVT: Посібник з інсталяції (12 сторінок)

Друкувати сторінку

BASIC USER GUIDE

Once your installer has set all the installation programming and parameters, only the

General Programming and Main Menu page should be required.

GENERAL PROGRAMMING

The General Programming Page is designed for user end programming of such settings

as Time/Date and Ring Tones

Access the General Programming section by Pressing the monitor on (anywhere on the

screen) and the Pressing the gear symbol

The menu list comes up and all settings can be changed using the onscreen adjustments.

Press on the setting that you wish to change and use the up and down buttoms to

ammend

OPERATION

Press Front doorbell button on Outdoor station to create intercom call.

The screen will appear with the image of the door station pressed (on monitors

programmed to alight on call). At this time a snapshot opf the caller will be taken.

Answer by pressing ONCE the Speech Symbol

OR Speaker Symbol

– The

communication can now occur between Door and Monitor.

If a Door locking device is connected Pressing the Door release Button OR

Padlock 1

will trigger the lock to release.

Padlock 2

is reserved for Second locking devices connected to the same door station

– Additional Relay Module is required for this.

Ending the call is by pressing the Power Off Symbol

USING KEYPAD DOOR STATION

Enter your user code followed by the # Key to trigger lock.

MONITOR

The monitor function is used to bring the Door station or Camera connected to the

system for remote viewing.