DORANI DORVT Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Домофонна система DORANI DORVT. DORANI DORVT 8 сторінок. Touch video intercom system
Також для DORANI DORVT: Посібник з інсталяції (12 сторінок)

Друкувати сторінку

Pressing the desired time will cease all calls to this monitor.

DIVERT

If a Telephone or GSM interface has been installed, diversion can be set for the system.

Diversion can be Inactive, If No Answer or Simultaneously to the designated phone

numbers.

Pressing the phone number location will activate the keyboard, input your phone

number and press OK, once completed you MUST press the save

button to store all

phone numbers.

The phone numbers will ring in succession until communication is obtained, or all

numbers have been exhausted.

More details on using these modules are supplied with the supplementary modules

Close turns of the screen and put the system into standy mode waiting a call.

PROGRAMMING CODES INTO KEYPAD DOOR STATIONS

Program New Master Code

This is the main programming code Keep this new code in a safe place)

Step 1: Press 1234 + # Key– Door station should go white

Step 2: Enter 01 followed by # - Door Station should go Yellow

Step 3: Enter 4 digit code followed by # - Door station should go Green then White

This is now the new Installer Code

Program new User Codes 20 – 29 for Door Release 1

Step 1: Press Master Code + # Key (e.g. 1234#) – Door station should go white

Step 2: Enter User Location to Program (20 – 29) followed by # - Door Station should go

Yellow

Step 3: Enter 4 digit code followed by # - Door station should go Green then White

Repeat steps 2 & 3 to program more users – Press * to exit programming at any time

Note: If RLC adapter is installed for a seconday release of the same door station separate

users and codes need to be programmed for these.

This is done the same as above using User numbers 60 - 69