Asus AT3IONT-I Series Посібник користувача - Сторінка 17
Переглянути онлайн або завантажити pdf Посібник користувача для Материнська плата Asus AT3IONT-I Series. Asus AT3IONT-I Series 48 сторінок. Asus computer hardware
Також для Asus AT3IONT-I Series: (Французькою мовою) Короткий посібник для початківців (28 сторінок)
Друкувати сторінку
1.6
Jumpers
1.
Clear RTC RAM (3-pin CLRTC)
This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can
clear the CMOS memory of date, time, and system setup parameters by erasing
the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in
CMOS, which include system setup information such as system passwords.
AT3IONT-I SERIES Clear RTC RAM
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3
for about 5-10 seconds, then move the cap back to pins 1-2.
3. Plug the power cord and turn ON the computer.
4. Hold down the <Del> key during the boot process and enter BIOS setup to re-enter
data.
Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default
position. Removing the cap will cause system boot failure!
If the steps above do not help, remove the onboard battery and move the jumper again to
clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery.
1.7
Connectors
1.7.1
Rear panel connectors
1
16
ASUS AT3IONT-I Series
CLRTC
Normal
(Default)
2
3
15
14
Clear RTC
4
13
12
5
6
7 8
10
9
11
1-8