Baumer IO-Link RR30 Інструкція з експлуатації - Сторінка 4

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Аксесуари Baumer IO-Link RR30. Baumer IO-Link RR30 40 сторінок. Radar sensor

Sensors covered by this manual

These instruction apply to the following sensor versions:

Version

Distance range

RR30.DAF0

0.2 m - 6 m

RR30.DAJ2

0.3 m - 12 m

RR30.DAO0

0.5 m - 60 m

The limits and default values in terms of distance can be different for each type of sensor.

IO-Link is an IO technology standardized worldwide according to IEC 61131-9. It permits manufacturer-

independent digital, bidirectional point-to-point communication. For this purpose, sensors are connected to the

IO-Link master via standardized 3-wire plug-in cables. IO-Link is available for various sensor technologies and

can also be integrated into small miniature sensors. See also

With the IO-Link master, which bundles several sensors, the connection to the controller is made via the

respective fieldbus system. In addition, an Ethernet-based connection (with OPC UA) from the master allows

direct communication from the sensor to IT systems. IO-Link masters are available as field devices for

decentralized mounting or as versions for mounting in control cabinets. Many control suppliers also offer IO-

Link input terminals and thus an IO-Link master implemented directly on the control. The maximum cable

length between sensor and master is 20 m. However, significantly longer connections from the sensor to the

controller can be realized by connecting a field master to a field bus system. This gives them maximum

flexibility in the connection solution.

As a member of the IO-Link Consortium, Baumer is involved in developing the standard and is one of the first

manufacturers to feature the new Smart Sensor Profile 1.1. in its sensors.

Figure 1 Example of a system architecture using IO-Link

en_BA_RR30_IO-Link_V0.23.docx

13.01.2021/

here

for more information.

4/40

Baumer Electric AG

Frauenfeld, Switzerland