Doughpro PP1818 Посібник з експлуатації - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Комерційне харчове обладнання Doughpro PP1818. Doughpro PP1818 11 сторінок. Manual dough press

Друкувати сторінку

Safety Summary

WARNING

In case of power cord damage,

do not attempt to repair or

replace the power cord. Contact

the manufacturer or the local

distributor.

WARNING

Avoid touching hot surfaces

while operating the machine.

CAUTION

During normal operation, the

base of the machine must be

installed or placed above the wall

socket.

CAUTION

When servicing or cleaning the

machine, make sure that the

power cord is removed from the

wall socket.

Control Board Operations

Solid State Controller

This controller has three (3) control

features:

1. Temperature – Temperature may

be set from 100°-325°F (38°-

163°C). The factory default

setting is 150°F. If you would

like to change this setting, simply

follow the Controller Operation

directions.

2. Counter – Cycle counter counts

the number of applications from

1 to 9999 (see additional Notes –

Counter).

3. Timer – Timer may be set from 1

– 99 seconds. The factory

default setting is 10 seconds. If

you would like to change this

setting, simply follow the

Controller Operation directions.

Controller Operation

Temperature Control

1. Press the MODE button until

temperature is displayed.

2. Push and hold SET button and

simultaneously push UP ( ) or

DOWN ( ) arrow buttons to the

desired temperature setting.

Time Control

1. Press the MODE button until

time is displayed.

2. Push and hold SET button and

simultaneously push UP ( ) or

DOWN ( ) arrow buttons to the

desired timer setting.