Apogee DLX24 Інструкція з експлуатації - Сторінка 11

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Обладнання для запису Apogee DLX24. Apogee DLX24 20 сторінок. Digital loudspeaker controller/system control manager software

Друкувати сторінку

1. Software Configuration

5.4 Input Processing

The processing available for each audio input channel are shown on the Input Processing Screen.

1) The controls in this section include:

• MUTE- Mute signal by pressing the

• POLARITY- Press

• LEVEL- Select level by entering dB number or using the gain fader.

• DELAY- Choose amount of delay (up to 1 second, displayed in units of time or distance)

2) CROSSOVER- The Low-Pass and High-Pass filters define a frequency bandwidth.

Available filter types that can be selected from the TYPE drop-down menu are:

• Bypass (filter not activated)

• Bessel (12, 18, 24 or 48 dB/oct)

• Butterworth (6, 12, 18, 24 or 48 dB/oct)

• Linkwitz-Riley (12, 24 or 48 dB/oct)

3) PARAMETRIC EQ- These filters enhance or attenuate different frequency ranges of the signal. Eight

filters are available for each input, and each one of them can have the following settings (selected from

the TYPE drop-down menu):

• Bypass (filter not activated)

• Parametric EQ (controls for frequency, Q [bandwidth] and gain of the affected band)

• High Shelf (6 or 12 dB/oct)

• Low Shelf (6 or 12 dB/oct)

• High Pass (6 or 12 dB/oct)

• Low Pass (6 or 12 dB/oct)

• All Pass (1st or 2nd order)

5. Software Configuration

button.

to select polarity

Fig. 5-11