Maintronic DASPip UP Короткий посібник - Сторінка 5

Переглянути онлайн або завантажити pdf Короткий посібник для Контролер Maintronic DASPip UP. Maintronic DASPip UP 6 сторінок. Power pwm actuator 1ch

Друкувати сторінку

5.3 Adjust Min-Level

In some situations it is necessary to readjust the min level. If no

DALI is available, the Min level can also be set via a 230V Push-

button connected to the tastDIM *. Perform programming with

the following steps within 15 minutes after power-on:

START

min-level

PROG

> 1s

SAVE

> 2s

min-level

7. Protection functions

Short-circuit shutdown

When a short circuit occurs, device automatic switch-off. Every

30 seconds is tested whether the short circuit is still present.

When short circuit is eliminated, device restart automatically.

If the error is still present after 5 minutes, device switch off

completely.

LED

Power limitation at overtemperature

flash

In the event of overtemperature, an automatic derating oc-

curs, which means that the dimmer's power is throttled and

the load is dimming down.

Important!

The connected load is reduced depending on the type of ins-

tallation:

•

Installation in hollow or wooden walls by 15% as well

•

10% for each 5 ° C exceeds the ambient temperature of

25 ° C

LED

light up

8. Attachment

8.1 Excerpt from the technical data

DASP ip INS /

DASP ip UP

PWM output

Max. output current

Ballast-relay

Switched phase L´

Power supply

Ceiling / installation housing (DASPip INS)

Licensed under DM/053379 of Tridonic

Housing mode

DASPip INS: L=101,5 x B=51 x H=29,5 mm

Dimensions

DASPip UP: L=46,5 x B=70 x H=30 mm

IP Code according to

DIN EN 60529

Protection class

Temperature

(environment) ta

Detailed technical data can be found in the data sheet.

1 channel - diming range 0...100 %

125 Hz

switch, not potential-free,

switched phase

1 x 16 A/ 230 V AC

220V-240V AC 50 / 60Hz

flush mounted (DASPip UP)

IP20 10mm/5KV

0° – 50° Celsius