Adey MagnaClean Professional Інструкція з монтажу та обслуговування - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція з монтажу та обслуговування для Системи фільтрації води Adey MagnaClean Professional. Adey MagnaClean Professional 7 сторінок.

Друкувати сторінку

Loosely secure the MagnaClean Professional

canister to the valves. Grip the MagnaClean canister

and tighten the compression fittings being careful

not to over tighten.

Loosen off the valve flange nuts and insert the

rubber washers provided. Thoroughly tighten the

flange nuts. Do not over tighten.

Refill the heating system.

Protecting the nation's central

heating systems

Installer:

Telephone:

Installation date:

Serial No.

Run the central heating system while checking

for leaks. Attach the self-adhesive MagnaClean

Professional label to the boiler, indicating your

name, telephone number, date of installation and

serial number. Always service the filter before

leaving the premises. The lid and valve spanner

can be left with the customer.

Servicing

Important – Before commencing any servicing work,

turn off electrical supply to the boiler. Ensure the

water is not too hot to undertake work on the

system. Turn off both isolation valves to the marked

OFF position. Loosen the air vent to release internal

pressure. When venting, protect the surface below

the canister with a dust sheet or container to

capture any drops of water.

Using the MagnaClean Professional lid spanner,

carefully unscrew the lid.

Remove the complete lid assembly from the

MagnaClean Professional.

Turn the lid assembly upside down in order that the

underside of the lid acts as a drip tray.