Adey MagnaClean Professional Інструкція з монтажу та обслуговування - Сторінка 4

Переглянути онлайн або завантажити pdf Інструкція з монтажу та обслуговування для Системи фільтрації води Adey MagnaClean Professional. Adey MagnaClean Professional 7 сторінок.

Друкувати сторінку
4
Wrap paper towelling around the build-up of
sludge on the plastic sheath. Place lid assembly over
a bucket and remove the plastic sheath from the
magnet, remove the sludge then rinse clean.
Replace the sheath over the magnet.
5
Replace the lid assembly onto the canister and
tighten until sealed. Do not over tighten.
6
Open the isolation valves to the marked ON
position and vent/bleed through the Pro-Fill air
vent. Protect the surface below the canister with a
dust sheet or container to capture any drops of
water. Run the central heating system while
checking for leaks. Repeat steps 1 - 6 if required.
Ensure the filter is thoroughly clean before
leaving the premises.

Chemical dosing

1
With a standard radiator key remove the Pro-Fill air
vent. The built-in, one-way valve will prevent water
from escaping. Attach chemical adapter and
feed in chemical.
2
Wait for five seconds before removing the adaptor.
The Pro-Fill air vent will accept all market-leading
chemicals in either liquid or concentrate form.
3
Replace the Pro-Fill air vent. Allow the system to
circulate for 30 seconds. Open the Pro-Fill screw
two turns and back flush until clear.