Airflow Uno hab Інсталяційний комплект - Сторінка 6
Переглянути онлайн або завантажити pdf Інсталяційний комплект для Контролер Airflow Uno hab. Airflow Uno hab 16 сторінок. Cavity wall decentralised mechanical ventilation with heat recovery unit
Також для Airflow Uno hab: Посібник з монтажу та експлуатації (16 сторінок), Інструкція (2 сторінок), Посібник з технічного обслуговування (2 сторінок)
Друкувати сторінку+
IMPORTANT
+
IMPORTANT
m
ATTENTION
m
ATTENTION
CHAPTER 3
SCOPE OF
DELIVERY
© Airflow - we reserve the right to make changes without prior notice
2.8
Fireplaces
The relevant applicable rules for the joint operation of fireplaces, ventilation, extraction hoods must be followed.
General note
The Unohab ventilation units can be connected air monitoring sensors connected back to the Unohab controller.
Only Airflow supplied sensors should be used.
2.9
Protection against contact
The ventilation units are delivered with a fan protection grille as standard.
2.10 Motor characteristics
The ventilation units have an energy-saving, maintenance-free EC motor (electronically isolated, ball bearing-
mounted) with high energy efficiency, guarded and electronic restart.
2.11 External grille
The external grille is to be installed on the external wall.
The wall sleeve installation through the external wall has to be carried out with appropriate safety measures
taken!
2.12 Stainless steel considerations
If you are using the Airflow optional stainless steel grille (manufactured out of 304 grayed stainless steel),
can change colour slightly due to air pollution! Regular cleaning reduces the risk of discolouring.
In environments with strong air pollution particularly coastal areas, with a high salt air concentration, the stainless
steel material should be protected by an additional protective lacquering (clear acrylic lacquer).
3.0
Scope of delivery
Keep the unit in its original packaging until just before it is installed, in order to prevent any possible
damage and contamination.
Unohab Cavity Wall Installation Kit
Consisting of:
1. Unohab unit with internal grille and filter
(90000993):
– White plastic internal grille with integrated
Coarse 50% filter
– EC axial fan with 2-part connector
– EPP* half shell (base body)
– Ceramic heat exchanger
– Flow straightener
– Fan protection grille
– Pull-out tool
– Protection grille
*Expanded Polypropylene
2. 500mm wall sleeve
– Condensate wedge (fitted to the sleeve)
– 2 protective covers
– Fixing wedges
3. White external grille
Unohab Cavity Wall Installation Kit
Part no: 90001177
(90001005)
(90001007)
6
Installation and Operating Instructions
3
2
1
fig.1