Makita AN611 Інструкція з експлуатації - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Електроінструмент Makita AN611. Makita AN611 13 сторінок. Construction coil nailer
Також для Makita AN611: Інструкція з експлуатації (19 сторінок), Розбивка на частини (4 сторінок), Розбивка на частини (4 сторінок), Інструкція з експлуатації (12 сторінок)
Друкувати сторінку
ENGLISH (Original instructions)
SPECIFICATIONS
Applicable length
Dimensions (L X H X W)
Min. hose diameter
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
Wear safety glasses.
Do not use on scaffoldings, ladders.
Noise
The typical A-weighted noise level determined according
to EN792:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration emission value determined according to
EN792:
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
Model
Air pressure
Wire welded nails
Plastic sheet collated nails
Nail capacity
Net weight
) : 91 dB(A)
pA
) : 104 dB(A)
WA
2
) : 3.0 m/s
h
2
0.44 - 0.83 Mpa (4.4-8.3 bar) (65 - 120 PSIG)
END106-3
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
ENG905-1
is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
We
Makita
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Construction Coil Nailer
ENG904-1
Model No./ Type: AN611
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
ENG901-1
EN792
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
2
AN611
32 mm - 65 mm
32 mm - 50 mm
200 - 400 pcs.
332 mm X 317 mm X 127 mm
6.5 mm
2.3 Kg
Corporation
as
ENH003-13
the
responsible