HIKVISION DS-7716NI-I4/16P Посібник із швидкого старту - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для ВІДЕОРЕЄСТРАТОР HIKVISION DS-7716NI-I4/16P. HIKVISION DS-7716NI-I4/16P 2 сторінки.
Також для HIKVISION DS-7716NI-I4/16P: Посібник із швидкого старту (17 сторінок)

Друкувати сторінку

HIKVISION DS-7716NI-I4/16P Посібник із швидкого старту

1 0

A D D I P C A M E R A S ( c o n t i n u e d )

1) Click an unused camera channel's D

checkbox.

2) Click the EDIT (Pencil) button to display the Edit IP Camera window.

3) Use pull-down menu to change Adding Method from "Plug and Play" to "Manual."

4) Enter the camera's IP address and other information as required.

5) Press the OK button to add the camera.

x Hikvision Cameras Not Detected — Must be added manually:

1) Click an unused camera channel's D

checkbox.

2) Click the EDIT (Pencil) button to display the Edit IP Camera window.

3) Use pull-down menu to change Adding Method from "Plug and Play" to "Manual."

4) Enter the camera's IP address and other information as required.

5) Press the OK button to add the camera.

NOTE:

If camera does not connect, use SADP program to find and modify camera

settings.

x Third-Party Cameras — Must be added manually:

1) Click an unused camera channel's D

checkbox.

2) Click the EDIT (Pencil) button to display the Edit IP Camera window.

3) Use pull-down menu to change Adding Method from "Plug and Play" to "Manual."

4) Enter the camera's IP address and other information as required.

5) Press the OK button to add the camera.

IP Camera Management Icons

Icon

Explanation

Icon

Explanation

Edit basic camera parameters

Upgrade the connected camera

Camera disconnected; click icon

to get camera's exception

Delete the IP camera

information

Play connected camera's live

Camera connected

video

1 2

S E T U P R E C O R D I N G ( c o n t i n u e d )

- Max Bitrate (kbps) is the chosen bitrate for streaming the video. Max Bitrate should be

adjusted to meet or exceed the rate recommended by the system for the chosen

parameters.

- Max Bitrate Recommended is impacted by resolution, quality, and framerate.

- Record Audio turns on audio recording (requires external mic or camera w/built in mic.

- Video Stream determines which stream is recorded. Leave at default (Main Stream).

•

Substream

Go to RECORDING CONFIGURATION > RECORD QUALITY > SUBSTREAM to set up

the Sub Stream to stream to mobile devices and display multiple cameras locally.

NOTE:

If the upload speed is not sufficient, lower the frame rate, bitrate,

and or resolution for more fluent mobile viewing.

. SUBSTREAM TAB

. 3

Select

3 CAMERA

Select camera

$ STREAM TYPE

Select choice

/ RESOLUTION

Can go up only to 4CIF

1 VIDEO QUALITY

Select number of green squares

to set quality (in example,

sensitivity is set to 3)

P L A Y B A C K R E C O R D E D V I D E O

Go to MENU > PLAYBACK.

Select the desired camera(s) from the menu on the right of the screen.

Select date (days w/recordings will be blue if continuous only or yellow if all/part of day was event).

Press PLAY.

Click within the timeline to jump to desired time.

. PLAYBACK TYPE MENU

Select type of record to play

3 FULL SCREEN

Goes to full screen for multiple

channel playback

$ PLAY/STOP

Begin playback (toggles between

Play and Stop)

/ CAMERA LIST

Select camera(s) to play back

1 CALENDAR

Select date to play back

4 TIMELINE

Click on timeline to jump to

desired playback time

1 0

A D D I P C A M E R A S ( c o n t i n u e d )

. NVR CAMERA CHANNELS

Cameras connected to NVR

3 PLAY

Play camera's live video

$ EDIT (Pencil)

Change IP address (in LAN range)

/ CAMERA LIST (White)

Added cameras

1 LAN CAMERAS LIST (Yellow)

Detected cameras will appear here

4 CAMERA CONNECTED

Shows camera is connected

2 CAMERA DISCONNECTED

Shows disconnected camera

( PASSWORD VISIBLE

Show passwords

, ENABLE H.265

Use H.265

V I E W L I V E V I D E O

Live View displays real-time video.

Icons in the upper right of screen show

each camera's record and alarm status.

• Alarm (video loss, tampering, motion

detection, sensor alarm, or VCA

alarm)

• Record (manual record, continuous

record, motion detection, alarm, or

VCA triggered record)

• Event/Exception (event and

exception information appears at

lower-left corner of screen)

S E T U P R E C O R D I N G

The system defaults to continuously record video at 8 fps, or at 15 fps when motion is detected.

T Recording Schedule

Default is to continuously record everyday. Do the following to change the recording schedule:

1. Go to MENU > RECORDING CONFIGURATION > SCHEDULE.

2. Choose CONTINUOUS or EVENT/(MOTION DETECTION) under the Type pull-down menu.

3. Use cursor to select (days will turn blue [continuous] or yellow [event/motion detect]) or deselect

(days will turn gray [off]) the calendar days you wish to record.

1 3

P L A Y B A C K R E C O R D E D V I D E O ( c o n t i n u e d )

Playback Controls

T Play Back Record Files

Go to MENU > LIVE VIEW.

Left click a Live View window to bring up a shortcut toolbar and click on the

playback.

T Playback Controls

Right click a Live Image to display a Quick menu and click on

icon for instant playback.

B A C K U P V I D E O R E C O R D I N G S A N D C L I P S

Back up recorded video clips to ensure important video is not lost or destroyed.

T Choose Recorded Video Clips To Back Up

1. Connect a USB flash drive, HDD, or DVD writer to an available USB port (this step is mandatory).

2. Go to MENU > PLAYBACK.

3. Select cameras for playback.

4. Select the date and beginning time of the incident.

5. Click START CLIPPING

button.

6. Select the ending time of the incident.

7. Click END CLIPPING

button (same button as START CLIPPING). Clip will be marked.

8. Repeat steps 1-6 as many times as required.

9. Click FILE MANAGEMENT

button to display a new window containing all marked clips.

10. Select the desired clips.

11. Click EXPORT to save files to the inserted USB device.

1 2

S E T U P R E C O R D I N G ( c o n t i n u e d )

4. Apply time settings as desired.

5. Press APPLY.

T Motion Detection Areas

To define the image areas that Motion Detection will monitor for each camera, do the following:

Go to MENU > RECORDING CONFIGURATION > MOTION DETECT.

Use Camera pull-down menu to select camera to configure.

Check the Enable Motion Detection checkbox to enable motion detection.

Use Sensitivity boxes to select how responsive detection should be (the more green boxes lit,

the greater the sensitivity).

Drag a grid(s) over the area(s) on the image that will be sensitive to motion.

Click the Settings Set button to configure Arming Schedule (when detection is enabled) and

Linkage Actions (what action(s) to take when motion is detected).

1 4

B A C K U P R E C O R D E D ( c o n t i n u e d )

T Lock Video Clips

1. Click on the images of the clips you want to lock.

icon for instant

2. Press the LOCK

button to prevent the file from being erased.

T Back Up Video Clips

1. Connect a USB flash drive, HDD, or DVD writer to an available USB port.

2. Click on the File Management button to display the File Management window.

3. In the File Management window, choose video clip(s) to back up and click Export button.

4. Choose backup device (USB flash drive, USB HDD, or DVD writer).

5. Click Export (to check backup, choose recorded file in Export interface and click

1 2

S E T U P R E C O R D I N G ( c o n t i n u e d )

T Record Quality

•

Main Stream

. TYPE

Go to RECORDING CONFIGURATION > RECORD QUALITY > MAIN STREAM and set

Motion or Continuous (default)

the following items:

3 COLOR

- Stream Type enables/disables audio streaming from the cameras (if the camera does

Shows Recording Schedule days:

not have audio capabilities, Stream Type will have only Video option).

• Blue=Continuous

- Resolution sets recording resolution.

• Yellow=Event (motion/alarm)

• Grey=None

- Bitrate Type (Variable and Constant) saves HDD space when set to Variable.

$ TIMES

IP Cameras

Customize schedule times (ignore for

"motion only" recording)

/ ADD

Press to add time settings to

schedule

1 ENABLE SCHEDULE

If not checked, camera will not record

Analog Cameras

. CAMERA

Select camera

3 ENABLE MOTION DETECTION

Click to enable/disable

$ MOTION GRID

Draw grid area to detect motion

/ SENSITIVITY

Select # of green squares to set

- Video Quality adjusts picture clarity (high setting = four green squares is default).

sensitivity

Consider highest if hard drive space allows. Medium setting is a balance between good

1 SETTINGS/SET

picture and saving HDD space.

Configure arming schedule and

linkage actions

- Frame Rate sets recording frame rate (8 fps on continuous and 15 on motion by

4 APPLY

default). Higher frame rates require more storage, but allows better slow motion

Click to apply settings

playback.

- Max Bitrate Mode chooses between pre-set bitrate values and customized values

(General setting is default).

. CAMERA LIST

Select cameras to view

3 CALENDAR

Select dates to view

$ PLAY/STOP

Toggles between Play and Stop

/ START/STOP CLIPPING

Toggles between Start Clipping

and Stop Clipping

1 LOCK

Locks selected video clips to

prevent them from being deleted

4 FILE MANAGEMENT

Displays list of saved clips, export

clips from this window

button).

. VIDEO CLIPS LIST

Select desired clips to export

3 EXPORT BUTTON

Save clips to USB device

Hikvision USA Inc., 908 Canada Court, City of Industry, CA 91748, USA

Hikvision Canada, 4485 Dobrin, St-Laurent, Quebec, Canada, H4R 2L8

Telephone: +1-909-895-0400 • Toll Free in USA: +1-866-200-6690

E-Mail: [email protected] • www.hikvision.com

Specifications subject to change without notice. QSG DS-7716NI-I4/16P 032717NA

. MAIN STREAM

Select tab

3 CAMERA

Select IP camera

$ EVENT

For event recording only (motion

or alarm)

/ CONTINUOUS

For live view image and

continuous recording

1 VIDEO QUALITY

Select number of green squares

to set quality (in example,

sensitivity is set to 3)

. MAIN STREAM

Select tab

3 CAMERA

Select analog camera

$ EVENT

For event recording only (motion

or alarm)

/ CONTINUOUS

For live view image and

continuous recording

1 VIDEO QUALITY

Select number of green squares

to set quality (in example,

sensitivity is set to 3)