Avtech AVM457A Посібник з монтажу - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник з монтажу для IP-камера Avtech AVM457A. Avtech AVM457A 4 сторінки.

Друкувати сторінку

TYPE3



 Standard package

Installation

Camera

Instructions

 Optional

Desiccants

Waterproof

CD manual

accessory kit

Step1: Remove the sun shield from the camera.

Step2: Locate where you want to install this camera, and fasten the camera to the ceiling or wall (Figure 1).

Note: A file for its installation sticker could be downloaded from www.surveillance-download.com/user/c_installation_sticker.pdf.

Note: It's recommended to slightly loosen the screw on the bracket as indicated below to move the camera down a little bit. It's easier for bracket installation.

Step3: Adjust the viewing angle of the camera, as indicated in Figure 2.

Slightly

loosen

Guide

Screws &

wall plugs

Step4: (Optional) To install a microSD card if supported, open the camera front cover, and refer to the section of "INSERT A MICRO SD

CARD" for details.

Step5: (Optional) To adjust the focus and focal length if supported, open the front cover of the camera, and refer to the section of "ADJUST

FOCAL LENGTH & FOCUS" for details.

Step6: Fasten the sun shield to the camera.

Note: In order to make the best performance, please adjust the angle of IR shift up and down within 30 degree respectively, left and right within 15 degree

respectively.

Note: If the temperature of the installation environment is under 0˚C, 50 minutes or more will be needed for the camera to warm up.

Horizontal

Slightly

loosen

Figure 1

Vertical

Rotate

Slightly

loosen

Figure 2

357_359_552_553_561_quick_V0.9