AQUAPHOR RO-31 Посібник користувача - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник користувача для Системи фільтрації води AQUAPHOR RO-31. AQUAPHOR RO-31 12 сторінок. Drinking water machine
Також для AQUAPHOR RO-31: Інструкція з експлуатації (17 сторінок)

Друкувати сторінку

For the last stage of preparation for premium-

class drinking water, the RO uses a natural

mineral that allows one to achieve a beneficial

dosing of useful substances into the purified

water. However, since this mineral is rather

fragile, during transportation some dust may be

generated that must be washed off when the

water purifier is first started.

ATTENTION! Do not drink the water that

was obtained during the flushing procedure.

During the first week of operation, check the

RO daily for leaks.

In the first week of operation of the water

purifier, when the automatic valve is actuated,

noise may be observed associated with the air

outlet from the internal cavities of the water

purifier. After a while, this process will stop. This

is not a malfunction.

7. OPERATION OF THE RO

When connecting the tip to the collection bowl, water starts flowing.

After the water is filled and the float is risen up, the tip is automatically disconnected.

If you want to stop the filling of water into the bowl ahead of schedule, just press the button located on the

top of the bowl cover.

Return the nose into the cradle not later than 1 hour after the start of filling the collection bowl with water.

ATTENTION! For proper operation of the RO, it is not allowed to create tension of the tube while filling the

collection bowl with water. Fig. 10a and 10b show the correct and incorrect placement of the tube and the

collection bowl during filling with water.

Figure 10a

At the wrong positioning of the tube, the tip's automatic shut-off system may not work correctly, resulting

in possible spillage or overflowing.

Removing the cover of the collection bowl (fig. 11a, 11b)

• Pull the front of the cover (in the nozzle) upward to form the small gap between the cover and the machine

as shown in (fig. 11a).

• Press down your thumb on the back of the cover until it moves forward, as shown in (fig. 11b).

ATTENTION! Do not drop the bowl.

Shutoff device operation

The position of the cartridges In the RO

For rinsing

Figure 9

Correct

Incorrect

Figure 10b

For operation