Olympus U-RFL-T Інструкція з експлуатації - Сторінка 7

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Мікроскоп Olympus U-RFL-T. Olympus U-RFL-T 16 сторінок.
Також для Olympus U-RFL-T: Інструкція з експлуатації (36 сторінок), Інструкція з експлуатації (16 сторінок)

2-2 Detailed Assembly Procedures

Fig. 1

†

...

Fig. 2

Connecting the Cable and Power Cord

The lamp housing cable and power cord are vulnerable to bend or

twist. Do not apply excessive force to them.

Be sure to set the main switch to "

lamp housing cable and power cord.

1. Insert the cable @ from an applicable lamp housing into the lamp housing

connector ² by aligning the connectors, and secure using the clamping

ring ³ on the lamp housing connector.

Always use the power cord provided by Olympus. If no power cord

is provided, please select the proper power cord by referring to the

section "PROPER SELECTION OF THE POWER SUPPLY CORD" at

the end of this instruction manual.

2. Insert connector | of the power cord into connector ƒ of the power

supply firmly.

Always use the power cord supplied by Olympus and connect it to a

3-conductor wall outlet with a grounding terminal. If the grounding

terminal of the wall power outlet is not grounded/earthed, Olympus

can no longer warrant the electrical safety performance of the

equipment.

3. Insert the plug ... of the power cord into the wall power outlet †.

U-RFL-T/U-RX-T

(Figs. 1 & 2)

" (OFF) before connecting the