Olympus U-RFL-T Інструкція з експлуатації - Сторінка 9

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Мікроскоп Olympus U-RFL-T. Olympus U-RFL-T 16 сторінок.
Також для Olympus U-RFL-T: Інструкція з експлуатації (36 сторінок), Інструкція з експлуатації (16 сторінок)

PREPARATION

Fig. 4

For centering of the burner, refer to the description on the burner centration in the instruction manual provided with the

microscope in use or an accessory module.

1. Set the main switch @ of the power supply to " I " (ON).

2. The burner is ignited automatically by the auto ignition mechanism.

If the mercury burner is not ignited even though passing 30 seconds or

more after the main switch @ of the power supply unit is set to " I " (ON),

set the main switch @ to "

and set the main switch @ to " I " (ON) again.

3. The lamp on LED ² lights up when the burner is ignited.

4. After ignition, the arc image of mercury burner stabilized in 5 to 10 minutes

and that of xenon burner stabilizes in 3 to 5 minutes.

CAUTION

The mercury burner cannot be re-ignited immediately after extinction.

After turning it off, wait for about 10 minutes, until the mercury vapor

inside it cools down and liquefies.

U-RFL-T/U-RX-T

" (OFF) once, and wait 10 seconds or more