Alpha-InnoTec SWC - Series Посібник з експлуатації - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Тепловий насос Alpha-InnoTec SWC - Series. Alpha-InnoTec SWC - Series 20 сторінок. Brine/water heat pumps
Друкувати сторінку
5.2 Storage
directly before installation.
Store unit protected against:
– Moisture/damp
– Frost
– Dust and dirt
5.3
Notes on safe transport
The housing with the unit components and the
module box are heavy (
or damage to property if the housing with the unit
components falls or overturns or if the module box
falls.
The housing with the unit components and
module box must be transported and installed
by several persons.
Secure the housing with the unit components
during transport. Carry the module box by the
carrying lugs.
of the unit.
Wear cut resistant protective gloves.
The hydraulic connections are not designed for
mechanical loads.
Do not lift or transport the unit by the hydraulic
connections.
If the module box is tilted by more than 45°,
compressor oil runs into the cooling circuit.
Do not tilt the unit with installed module box by
more than 45°.
alternatively with a handcart.
Transport the unit to the place of installation
10
Subject to change without notice | 83056700dUK – Translation into English of the original German operating manual | ait-deutschland GmbH
"Technical data/Scope of
NOTE
and dismantling the housing panels.
1.
damage the unit.
2.
friendly way according to local regulations.
3.
front panel in the place of installation.
Dismantle housing panels for transport with
handcart or carrying the unit
1.
To avoid damage to the housing panels:
– Undo 2 screws at the bottom of the front
panel.
– Lift up the front panel and put down in safe
place.
– Undo 3 screws in each side panel.
– Lift up side panels and put down in safe
place.
2.
1.
8x
3.