Cisco ASR 920 series Посібник
Переглянути онлайн або завантажити pdf Посібник для Перемикач Cisco ASR 920 series. Cisco ASR 920 series 36 сторінок. Aggregation services router
Також для Cisco ASR 920 series: Посібник з встановлення (36 сторінок), Початок роботи (6 сторінок), Посібник з встановлення (42 сторінок), Посібник з встановлення обладнання (46 сторінок)
Друкувати сторінку
Installing the Cisco ASR 920 Series Router
This chapter describes how to install the Cisco ASR 920 Series Router and includes the following sections:
•
•
•
•
•
•
•
•
•
•
Prerequisites
Before installing the Cisco ASR 920 Series Router, it is important to prepare for the installation by:
• Preparing the site (site planning) and reviewing the installation plans or method of procedures (MOP).
• Unpacking and inspecting the Cisco ASR 920 Series Router. See "Receiving the Cisco ASR 920 Series
• Gathering the tools and test equipment required to properly install the Cisco ASR 920 Series Router. See
For more instructions on how to prepare for the installation of the Cisco ASR 920 Series Router, see Chapter
2, "Preparing for Installation."
Installing the Router in a Rack
The following sections describe how to install the Cisco ASR 920 Series Router in a rack. The procedures in
this section apply to both horizontal and vertical mounting of the router in a rack:
Prerequisites, on page 1
Installing the Router in a Rack, on page 1
Install the AC Power Cables, on page 11
Install the DC Power Supply, on page 13
Connect SFP Modules, on page 16
Connect Gigabit Ethernet Ports, on page 20
Install the Chassis Ground Connection, on page 21
Power Connection Guidelines, on page 23
Connect Chassis to Network, on page 25
See "Site Planning" section on page 2-9 .
Router" section on page 2-20 .
"Tools and Equipment" section on page 2-21 .
Installing the Cisco ASR 920 Series Router
1