Cisco ASR 920 series Посібник - Сторінка 23

Переглянути онлайн або завантажити pdf Посібник для Перемикач Cisco ASR 920 series. Cisco ASR 920 series 36 сторінок. Aggregation services router
Також для Cisco ASR 920 series: Посібник з встановлення (36 сторінок), Початок роботи (6 сторінок), Посібник з встановлення (42 сторінок), Посібник з встановлення обладнання (46 сторінок)

Installing the Cisco ASR 920 Series Router

Figure 21: Stripping a Ground Wire

Step 2

Slide the open end of your 2-hole ground lug over the exposed area of the ground wire.

Step 3

Using a crimping tool (as specified by the ground lug manufacturer), crimp the ground lug to the ground wire as shown

in the figure below.

Figure 22:

Step 4

Use a Phillips head screwdriver to attach the 2-hole ground lug and wire assembly to the router with the 2 pan-head

Phillips head screws.

Step 5

Connect the other end of the ground wire to a suitable grounding point at your site.

Power Connection Guidelines

This section provides guidelines for connecting the device power supplies to the site power source.

Warning

Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground

conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that

suitable grounding is available. Statement 1024

Warning

The plug-socket combination must be accessible always because it serves as the main disconnecting device.

Statement 1019

Power Connection Guidelines

Installing the Cisco ASR 920 Series Router