Cisco TelePresence IX5200 Перше налаштування - Сторінка 30

Переглянути онлайн або завантажити pdf Перше налаштування для Конференц-система Cisco TelePresence IX5200. Cisco TelePresence IX5200 40 сторінок.
Також для Cisco TelePresence IX5200: Посібник користувача "Швидкий старт (15 сторінок), Посібник користувача (26 сторінок), Посібник з монтажу (36 сторінок)

Performing First-Time Setup

Continue to the microphone connector test. Sit in front of a mic bar. Speak into one side of a mic bar

Step 10

(there are two segments to a single mic bar), or lightly scratch one side of a mic bar with your fingernail.

Icons on the screen light up and indicate the mic bar that is being activated.

Click Continue. Repeat this test for every mic bar segment (six in total for the first row, 12 in total for

Step 11

the second row). If you detect any problems, click Exit Setup and check the microphone cabling between

the mic bar, TDM, and Host CPU codec.

Tip

If the problem affects all mic bars, check the cabling between the TDM and the codec (the TDM is

located in the first and, if applicable, second row cable management panels). If the problem is with a

single mic bar, check the cabling between the mic bar and the TDM.

The Audio components are not hot pluggable. If you need to change working connections, you need to

Note

reboot the IX system and run the first-time setup again.

Cisco TelePresence IX5000 and IX5200 First-Time Setup

OL-27038-01