Xerox DocuPrint C3055 DX Посібник з налаштування - Сторінка 17
Переглянути онлайн або завантажити pdf Посібник з налаштування для Аксесуари для принтерів Xerox DocuPrint C3055 DX. Xerox DocuPrint C3055 DX 33 сторінки. Internal hard disk
Також для Xerox DocuPrint C3055 DX: Посібник з монтажу (8 сторінок), Посібник з монтажу (16 сторінок), Посібник з налаштування (20 сторінок), Посібник з монтажу (16 сторінок)
Друкувати сторінку
Alphanumeric
Sets the font for single-byte characters (ANK) to [Roman] (default) or [Sans Serif].
Note
• This setting is not affected by extension commands sent from users.
Refer to
• "1.2 About Fonts" (P. 9)
Page Position
Sets the paper position by enabling or disabling the cut sheet feeder setting.
The following options are available:
[CSF Off] (default)
Disables the cut sheet feeder setting.
[CSF On]
Enables the cut sheet feeder setting.
Adjust Position
This feature allows you to adjust the printable area in vertical or horizontal direction and
move the margins.
Up/Down Adj
Adjusts the position of the printable area in vertical direction. The position can be adjusted
within the range of -250 to 250 mm in increments of 1 mm. The default is [0mm].
If entering the value in inches, enter it within -9.8 to 9.8" in increments of 0.1". The default
is [0.0"].
Left/Right Adj
Adjusts the position of the printable area in horizontal direction. The position can be
adjusted within the range of -250 to 250 mm in increments of 1 mm. The default is [0mm].
If entering the value in inches, enter it within -9.8 to 9.8" in increments of 0.1". The default
is [0.0"].
Note
• The part of data that falls outside the printable area will not be printed even if you adjust the position of
the printable area. Also, the part of data that falls outside the printable area due to the adjustment of the
printable area will not be printed.
• Holding down the <
> or <
pressing the <
> and <
Ruled Line
Sets the method for printing double-byte ruled lines.
The following options are available:
[Image] (default)
Prints double-byte ruled lines as images. This eliminates misalignment between ruled lines
and images.
[Font]
Prints double-byte ruled lines in built-in fonts. This gives a uniform appearance to ruled lines
and texts.
Print Control
Skip Blank Pages
Sets whether or not to skip blank pages during printing.
The following options are available:
[On] (default)
Skips blank pages.
> button scrolls through the options in a circular fashion. Simultaneously
> buttons displays the default value.
2.2 Setting the ESC/P Mode Menu
17