DirecTV Genie C41W Посібник з встановлення та усунення несправностей - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник з встановлення та усунення несправностей для Приймач DirecTV Genie C41W. DirecTV Genie C41W 16 сторінок. Directv wireless video bridge and wireless genie mini
Друкувати сторінку
Wireless Client Troubleshooting
C41W Gray/Black screen no Banner
Troubleshooting
1. If the wireless client (C41W) network LED is Green, follow normal Gray/
Black screen troubleshooting.
Change channels
∎
Turn off the wireless client (C41W) for 15 seconds and then turn it
∎
back on.
Verify the customer's TV is on the correct input
∎
Verify cables and connection to the TV is good (including trying a
∎
different cable and input to the TV)
If the LED is not green, or normal Gray/Black troubleshooting
∎
does not resolve, continue to step 2.
2. Run system test on the Genie Server. Troubleshoot any error codes that
appear.
3. If there are no error codes, check the LED status light on WVB.
If LED is not blue, see WVB LED status troubleshooting
∎
∎
If WVB LED is blue, check LED status light on the wireless client
(C41W)
If LED is not solid green, see wireless client (C41W) status
∎
troubleshooting
4. On the Genie Server go to Setting & Help - Settings > Info & Test - More
System Info
a. Scroll down to the Wireless Client(s) that is having the issue and look
at its "RSSI".
b. If the RSSI does not show "Excellent" then troubleshoot the same as a
"Yellow" Network LED on the C41W"
5. If internet connected, power-cycle the router.
6. Reset the WVB.
7. Reset the Genie Server, and wait for it to boot up to video.
8. If the client does not have live TV, reset the client, wait for client network
LED to turn
green
and wait 2 minutes.
9. If the Genie Server is connected to the router wirelessly (HR44 internal
Wi-Fi/CCK-W), change to a BB-DECA, and refer to Resetting a Genie with
Clients section later in the training. If still unresolved, complete an FPR.
Wireless Genie Mini and WVB
Troubleshooting and Diagnostics
C41W Program Banner displayed, no Video on TV
Follow the troubleshooting steps listed for Gray/Black screen.
Freeze Frame/Pixelization on C41W
Follow the troubleshooting steps listed for Gray/Black screen.
C41W Video/Audio on TV but no Menu, Guide or List displays
Follow the troubleshooting steps listed for Gray/Black screen.
C41W: Add Clients failed (does not display video)
Follow the troubleshooting steps listed for Gray/Black screen.Wireless Client
Troubleshooting
Wireless Client Network LED Failures/Bad Wireless Connection
Symptoms
WVB has a Solid Red LED
∎
Wireless Client has Yellow, Red or Blinking Red Network LED
∎
Probable Cause
∎
Poor placement of the WVB and/or Wireless Client
Troubleshooting
1. For Yellow or Solid Red Network LED on the Wireless Client:
a. Ensure there are no obstacles around the WVB or the Wireless Client that would
degrade signal quality.
b. Try moving the WVB to a better location to improve the signal to the Wireless
Client locations. Remember the minimum distance guidelines to separate the
WVB from other wireless devices like the customer's router, an HR44 with built-
in Wi-Fi, or, for example, a Playstation 3 with a Wi-Fi connection.
2. For a blinking Red network LED on the Wireless Client:
a. Put the Genie Server back into "Add Client" mode: Menu - Settings & Help -
Settings - Whole Home - Manage Clients - Add Clients.
b. The Wireless Client should be on the Select a Server or Wireless Connection
Lost screen. Select Reset Wireless from the C41W on-screen display.
c. Follow the installation steps to check the signal strength and pair the Wireless
Client.
6
Troubleshooting