3D Hobby Shop Velox VR-1 Посібник з монтажу - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з монтажу для Іграшка 3D Hobby Shop Velox VR-1. 3D Hobby Shop Velox VR-1 17 сторінок.

Друкувати сторінку
5
When both wheel/axle/pant assemblies are fixed onto the gear legs, assemble the gear onto the fuselage
as shown. The screws used are 2 of the shorter black allen-head 3MM screws. Use loctite on these
screws.
Locate the rudder, the double-sided rudder control horn, and the tail-wheel wire as shown. Open the
slots in the covering on the rudder for the horn and wire as shown. Using thick CA glue, glue the horn
and wire into the rudder as shown.