3Doodler 2.0 Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари 3Doodler 2.0. 3Doodler 2.0 10 сторінок.
Також для 3Doodler 2.0: Посібник із швидкого старту (2 сторінок), Посібник (4 сторінок)

3Doodler 2.0 Посібник користувача
IT'S TIME TO 3DOODLE!
You are now the proud owner of a 3Doodler 2.0. The 3Doodler puts
the power of creation in the palm of your hand and allows you to
draw objects in 3D quickly and easily!
#WhatWillYouCreate?
To find great ideas for what you can create, as well as tips, tricks &
free downloadable stencils, please visit our community website at:
www.the3Doodler.com/Community
GETTING TO KNOW YOUR 3DOODLER
Injuries to the user may include, but are not
limited to, harm sustained from inhaling
substances that are not suitable for heating;
or burns from flammable materials used in
the 3Doodler.
N O T I C E
SNIP THOSE ENDS!
After removing a strand/filament from the
3Doodler, cut and remove any partially
melted material at the end of your strand
before re-feeding it into the 3Doodler. This
will reduce blockages or clogging issues.
DO NOT pull plastic/filament from the back
of the 3Doodler. This will result in damage to
your pen and will void your warranty. If you
wish to reverse your plastic/filament, please
follow the instructions on page [4].
When switching from lower temperature
plastic/filament (such as PLA or WOOD) to
higher temperature plastic/filament (such as
ABS or FLEXY), the presence of any
residual plastic/filament in the pen's heating
chamber may cause a slight amount of
smoke to emit from the pen. This is due to
the
application
temperature being applied to lower melting
temperature materials.
TM
of
a
higher
melting