Alto Professional TS315 Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Акустична система Alto Professional TS315. Alto Professional TS315 7 сторінок.

Setup

Volume Control

The TS3 Series loudspeaker accepts both line-level and mic-level audio

sources. Before connecting your audio source, turn the Volume knob to the

minimum position (fully counter-clockwise).

When using an audio source such as a mixer, CD/MP3 player or audio

preamp, follow the outer/Line level band indicator.

If the Signal Limit LED is on, do not advance the Volume knob any further.

Doing so may damage your TS3 loudspeaker.

In most circumstances, you will not need to turn the volume beyond 0 dB.

If your audio source has unusually low output, you may turn the Volume knob

past 0 dB, but not past the Signal Limit indicator (as explained above).

Important: If you are using an instrument with active preamp, treat the

instrument as a line-level audio source (as explained above).

When using a microphone or instrument audio source, follow the inner/Mic

level band indicator.

Because the mic and instrument level is typically lower than a line level, you

can use the full rotation of the Volume knob.

As you turn up the Volume knob, please observe the Signal Limit

indicator. If the Signal Limit LED is on, do not advance the Volume knob

any further. Doing so may damage your TS3 loudspeaker.