Alto Professional TS315 Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Акустична система Alto Professional TS315. Alto Professional TS315 7 сторінок.

Examples

Items not listed under

Introduction > Box Contents

are sold separately.

Note: These examples show the rear panel used by the TS310, TS312, and TS315 models, though all four

models in the TS3 Series have the same input and output.

Example A: One Loudspeaker

Guitar

Microphone

Connect a dynamic microphone to the Input 1 using an XLR or

1/4" (6.35 mm) TRS cable. Connect a guitar with an active

pickup to the Input 2 using a 1/4" (6.35 mm) TS or TRS cable

(see your guitar's documentation for cable requirements). For

Input 2, do not turn the Volume knob past the 0 dB position.

Note: When using the TS3 Series loudspeaker with a guitar, we

recommend using one with active pickups rather than passive

pickups. If you use a guitar with passive pickups, connect it to

an external preamp or direct input (DI) box, and connect the

line-level output to the loudspeaker.

Also, use dynamic microphones with the TS3 Series loudspeaker

rather than condenser microphones. If you use a microphone that

requires +48V of phantom power, connect it to an external

phantom power supply before connecting it to the loudspeaker.

Power Outlet

Example B: Two Loudspeakers

Connect the left and right output of your DJ mixer, controller, etc. to Input 1 of each loudspeaker using XLR

or 1/4" (6.35 mm) TRS cables. Do not turn the Volume knobs past the 0 dB position.

Tip: To send the same mix to both TS3 Series loudspeakers, connect both channels of your DJ mixer, controller,

etc. to the Input 1 and Input 2 of one loudspeaker, and then connect that loudspeaker's Mix Out to the Input 1

of the other loudspeaker. Both TS3 Series loudspeakers will then play identical summed mono mixes.

DJ mixer, controller, etc.

Power Outlet