Cypress MB96300 Series Посібник з налаштування - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник з налаштування для Мікроконтролери Cypress MB96300 Series. Cypress MB96300 Series 11 сторінок. F2mc-16fx family
Table 3-3. Jumper Settings on the Adapter Board (Short plug settings for analog power supply changeover
Jumper
Setting
AVCC_IN
A-B side (default)
A-C side
B-D side
C-D side
AVCC_OUT
USR side (default)
FLT side
AVRH_IN
A-B side (default)
A-C side
B-D side
C-D side
AVRH_OUT
USR side (default)
FLT side
AVRL_IN
A-B side (default)
A-C side
B-D side
C-D side
AVRL_OUT
USR side (default)
FLT side
AVSS_OUT
USR side (default)
GND side
Table 3-4. Jumper Settings on the Adapter Board (Short plug settings for C pin supply)
Jumper
Setting
C
USR side
EML side (default)
Refer to the Instruction Manual for the Adapter MB2198-500 for details on settings of the adapter board.
2
F
MC-16FX Family MB96300 Series Setup Guide, Doc. No. 002-06378 Rev. *A
Select the analog power supply (AVCC) from the user system
Select the analog power supply (AVCC), with an RC filter, from the user system
Select the analog power supply (VDD) from the UVCC connector
Select the analog power supply (VDD), with an RC filter, from the UVCC connector
Supply the power supply selected by AVCC_IN to the evaluation MCU analog power supply
(AVCC)
Add an RC filter to the power selected by AVCC_IN and supply to the evaluation MCU
analog power supply (AVCC)
Select the analog power supply (AVRH) from the user system
Select the analog power supply (AVRH), with an RC filter, from the user system
Select the analog power supply (UVDD) from the UVCC connector
Select the analog power supply (UVDD), with an RC filter, from the UVCC connector
Supply the power supply selected by AVRH_IN to the evaluation MCU analog power supply
(AVRH)
Add an RC filter to the power selected by AVRH_IN and supply to the evaluation MCU
analog power supply (AVRH)
Select the analog power supply (AVRL) from the user system
Select the analog power supply (AVRL), with an RC filter, from the user system
Select the analog power supply (VDD) from the UVCC connector
Select the analog power supply (VDD), with an RC filter, from the UVCC connector.
Supply the power supply selected by AVRL_IN to the evaluation MCU analog power supply
(AVRL)
Add an RC filter to the power selected by AVRL_IN and supply to the evaluation MCU analog
power supply (AVRL)
Connect the analog power supply (AVSS) from the user system to the evaluation MCU
analog power supply (AVSS)
Connect the GND and evaluation MCU analog power supply (AVSS)
Connect the capacitor on the user system to the C pin on the evaluation MCU
Connect the capacitor on the adapter to the C pin on the evaluation MCU
Description
Description
Hardware Setup
10