Douglas Dynamics WESTERN ENFORCER 97540 Installationsanleitung Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Schneefräse Douglas Dynamics WESTERN ENFORCER 97540 herunter. Douglas Dynamics WESTERN ENFORCER 97540 19 Seiten. Ultramount 2 snowplow

Seite drucken

T-FRAME TO BLADE ASSEMBLY

1. Remove the blade wings from the metal shipping

brackets. Discard the shipping brackets and

replace the cutting edge hardware.

2. Align the hinges of the blade wings. Position the

T‑frame assembly between the blade wings so the

holes in the T‑frame are aligned with the holes in

wing hinges.

3. Insert the pivot pin from top to bottom through all

hinges as shown.

4. Move the snowplow into a normal operating

position.

Pivot Pin

Lit. No. 74914, Rev. 01

INSTALLATION INSTRUCTIONS

5/32" x 1-1/2" Cotter Pins

5. Remove the protective packaging from the angle

rams.

6. Align the holes in the rod end of the angle ram

with the corresponding holes on the back of the

blade.

Install a 1/2" x 2‑7/8" clevis pin from the top to

secure each rod to the blade. Secure the clevis

pins with 5/32" x 1‑1/2" cotter pins.

1/2" x 2-7/8"

Clevis Pins

June 1, 2020