Atlas Copco PN 3500 Reparaturanleitung - Seite 3

Blättern Sie online oder laden Sie pdf Reparaturanleitung für Bohrer Atlas Copco PN 3500 herunter. Atlas Copco PN 3500 18 Seiten.

Seite drucken

Only applicable

Removing the locking sleeve (2):

for PN 3500 X:

Dismantling the

FIXTEC-recep-

tion

To remove the balls (4) (six pieces):

Remove the remaining parts:

- seal ring (6)

- outer spring (7)

- ejector ring (5)

- inner spring (8) and

- washer (9).

Detaching the

Switch the lever (4) to the "0"-position and

gear housing

break it off with aid of pliers. The lever (4)

gets destroyed.

Remove the four housing screws (1).

Only applicable for PHE 3500 X:

Open the locking ring (2) on the spindle

with aid of special pliers (5) (service tool)

and remove it together with the gear hous-

ing (3).

Removing the

Remove the two screws (1).

spindle

Remove the straight pin (5).

Remove the planetary gear (4) and the

ring gear (3).

Remove the complete spindle sleeve (2)

from the cylinder.

Fix the locking sleeve (2) in a pulling-

off device (3) and press it out. At the

same time, press down the spindle (1)

with a suitable sleeve.

Depress the seal ring (6) and remove

the balls with aid of a magnet.

Should this not be possible, fix the le-

ver (4) in a vice and break it off by mov-

ing the machine to and fro. Remove

any broken part from inside the ma-

chine.

Repair Instructions No.179.11/97

PN 3500 / PN 3500 X

5 6 7 8 9

PAGE