Atlas Copco PN 3500 Reparaturanleitung - Seite 5
Blättern Sie online oder laden Sie pdf Reparaturanleitung für Bohrer Atlas Copco PN 3500 herunter. Atlas Copco PN 3500 18 Seiten.
Seite drucken
1
Only applicable
Press the following parts from the
for PN 3500:
spindle (1):
Dismantling the
- washer (6)
spindle (remov-
- pressure sleeve (5)
ing the inner
- plunger (4) and
parts)
- brake disk (2).
2
Remove the O-rings (3) and (7).
1
Only applicable
Press the following parts from the
for PN 3500 X:
spindle (1):
Dismantling the
- washer (9)
spindle (remov-
- pressure sleeve (6)
ing the inner
- plunger (5)
parts)
- brake disk (4) and
- pressure sleeve (3).
2
Remove the O-rings (2), (7) and (8).
1
Removing the
Pull out the bearing housing (4).
back gear shaft
If necessary, loosen the bearing hous-
and the cylinder
ing (4) by hitting the gear housing lightly
with a plastic hammer.
2
Remove the back gear shaft (5) by turning
or canting it (see arrow in illustration).
3
Completely remove the cylinder (1) and
the back gear.
4
Push out the bolt (2) by hand and remove
the two disks (3).
Repair Instructions No.179.11/97
PN 3500 / PN 3500 X
1
1
2
1
2
3
4
5
2
7
5
6
3
4
7 8
3
4
5
PAGE
4
6
8
9
8
9