GReddy Intercooler Kit Installationshandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Installationshandbuch für Zubehör für Kraftfahrzeuge GReddy Intercooler Kit herunter. GReddy Intercooler Kit 7 Seiten. For toyota mr-2 turbo (sw-20)
Auch für GReddy Intercooler Kit: Gebrauchsanweisung (9 seiten), Installationshandbuch (9 seiten), Installationshandbuch (9 seiten), Installationshandbuch (13 seiten)

Seite drucken
GReddy Intercooler Kit Installationshandbuch
2.Install the intake pipes I-3, I-4 from the Intercooler
to the throttle body.
※Use the 50φ-54φhose and hose clamp from the
turbo kit.
3. Starting the Engine
3. Starting the Engine
3. Starting the Engine
3. Starting the Engine
1. Check all the pipe and hose connections, then reconnect the negative side of the battery.
2. Start the engine. While idling, check fom any air leaks.
3.After inspection, reinstall the front bunper, under cover and other stock parts that was
removed.
4.On the initial run, be sure to have a boost gauge to check the turbo-actuator setting. This
turbo kit is preset to boost between 0.3kg/cm
It is very important that you monitor the boost pressure, and make sure not to over boost.
Over boosting can cause engine damage.
(Parts Used #4, 5, 6, 7, 8, 9)
This completes the Intercooler Kit installation.
2
2
to 0.4kg/cm
(4.5-5.5 PSI).