GReddy Intercooler Kit Manual de instalación - Página 7
Navegue en línea o descargue pdf Manual de instalación para Accesorios para automóviles GReddy Intercooler Kit. GReddy Intercooler Kit 7 páginas. For toyota mr-2 turbo (sw-20)
También para GReddy Intercooler Kit: Manual de instrucciones (9 páginas), Manual de instalación (9 páginas), Manual de instalación (9 páginas), Manual de instalación (13 páginas)
Imprimir página
2.Install the intake pipes I-3, I-4 from the Intercooler
to the throttle body.
※Use the 50φ-54φhose and hose clamp from the
turbo kit.
3. Starting the Engine
3. Starting the Engine
3. Starting the Engine
3. Starting the Engine
1. Check all the pipe and hose connections, then reconnect the negative side of the battery.
2. Start the engine. While idling, check fom any air leaks.
3.After inspection, reinstall the front bunper, under cover and other stock parts that was
removed.
4.On the initial run, be sure to have a boost gauge to check the turbo-actuator setting. This
turbo kit is preset to boost between 0.3kg/cm
It is very important that you monitor the boost pressure, and make sure not to over boost.
Over boosting can cause engine damage.
(Parts Used #4, 5, 6, 7, 8, 9)
This completes the Intercooler Kit installation.
2
2
to 0.4kg/cm
(4.5-5.5 PSI).