Galvin Engineering Ezy-Drink Lead Safe SS316 Installations-Manuale - Seite 3

Blättern Sie online oder laden Sie pdf Installations-Manuale für Sanitärprodukt Galvin Engineering Ezy-Drink Lead Safe SS316 herunter. Galvin Engineering Ezy-Drink Lead Safe SS316 4 Seiten. Remote push button drinking bubbler

Seite drucken

Product Installation Guidelines

3. Tighten locknut and fit handle

−

To resist theft/vandalism, ensure the

stainless steel locknut is tightened firmly

using an appropriate wrench.

5. Fit flexi-hose

−

Fit flexi hose to outlet and body as shown.

4. Secure push button handle

−

Lock push button handle in place by fitting grub

screw and tightening using 2mm hex key. Take

care not to overtighten.

6. Testing

−

Once the drinking tap has been installed and tested

for leaks, the water height must be adjusted to suit

the available pressure.

−

To adjust water flow

1. Remove the blanking screw .

2. Adjust the water height by turning the regulator

screw .

3. Replace blanking screw.

Note: The full range from minimum flow to maximum

flow is only ¼ turn.

Version 4, 25

October 2022, Page 3 of 5