Galvin Engineering Ezy-Drink Lead Safe SS316 Instrukcje instalacji - Strona 3
Przeglądaj online lub pobierz pdf Instrukcje instalacji dla Produkt hydrauliczny Galvin Engineering Ezy-Drink Lead Safe SS316. Galvin Engineering Ezy-Drink Lead Safe SS316 4 stron. Remote push button drinking bubbler
Product Installation Guidelines
3. Tighten locknut and fit handle
−
To resist theft/vandalism, ensure the
stainless steel locknut is tightened firmly
using an appropriate wrench.
5. Fit flexi-hose
−
Fit flexi hose to outlet and body as shown.
© Galvin Engineering Pty Ltd
4. Secure push button handle
−
Lock push button handle in place by fitting grub
screw and tightening using 2mm hex key. Take
care not to overtighten.
6. Testing
−
Once the drinking tap has been installed and tested
for leaks, the water height must be adjusted to suit
the available pressure.
−
To adjust water flow
1. Remove the blanking screw .
2. Adjust the water height by turning the regulator
screw .
3. Replace blanking screw.
Note: The full range from minimum flow to maximum
flow is only ¼ turn.
th
Version 4, 25
October 2022, Page 3 of 5