Galvin Engineering Ezy-Drink Lead Safe SS316 설치 매뉴얼 - 페이지 3

{카테고리_이름} Galvin Engineering Ezy-Drink Lead Safe SS316에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Galvin Engineering Ezy-Drink Lead Safe SS316 4 페이지. Remote push button drinking bubbler

페이지 인쇄

Product Installation Guidelines

3. Tighten locknut and fit handle

−

To resist theft/vandalism, ensure the

stainless steel locknut is tightened firmly

using an appropriate wrench.

5. Fit flexi-hose

−

Fit flexi hose to outlet and body as shown.

4. Secure push button handle

−

Lock push button handle in place by fitting grub

screw and tightening using 2mm hex key. Take

care not to overtighten.

6. Testing

−

Once the drinking tap has been installed and tested

for leaks, the water height must be adjusted to suit

the available pressure.

−

To adjust water flow

1. Remove the blanking screw .

2. Adjust the water height by turning the regulator

screw .

3. Replace blanking screw.

Note: The full range from minimum flow to maximum

flow is only ¼ turn.

Version 4, 25

October 2022, Page 3 of 5