Fujitsu ETERNUS DX Disk Konfigurationshandbuch - Seite 26

Blättern Sie online oder laden Sie pdf Konfigurationshandbuch für Lagerung Fujitsu ETERNUS DX Disk herunter. Fujitsu ETERNUS DX Disk 35 Seiten. Server connection, fcoe for linux driver settings for converged network adapter cards
Auch für Fujitsu ETERNUS DX Disk: Benutzerhandbuch (35 seiten), Benutzerhandbuch (42 seiten), Konfigurationshandbuch (28 seiten), Konfigurationshandbuch (44 seiten), Konfigurationshandbuch (28 seiten), Konfigurationshandbuch (29 seiten), Konfigurationshandbuch (25 seiten), Konfigurationshandbuch (32 seiten), Konfigurationshandbuch (31 seiten), Konfigurationshandbuch (43 seiten), Konfigurationshandbuch (21 seiten), Konfigurationshandbuch (24 seiten)

Seite drucken
Fujitsu ETERNUS DX Disk Konfigurationshandbuch
Chapter 2
Setup Procedure for QLogic Converged Network Adapter Cards
2.2
Setting Up the Converged Network Adapter Cards
(2)
Select the Converged Network Adapter card to be set (BIOS setting) in the [Select Host Adapter]
window.
The [Fast!UTIL Options] menu appears. Then perform
11
Select [Exit Fast!UTIL] and press the [Enter] key.
12
Select [Reboot System] and press the [Enter] key.
The server reboots.
To return to the [Fast!UTIL] menu, select [Return to Fast!UTIL].
2.2.2

Setting Up SAN Boot

Refer to "Server Support Matrix" to check the support status of SAN Boot and refer to the manual of the serv-
er, OS, or the Converged Network Adapter card that is to be used.
When using a logical unit (LUN) of the ETERNUS DX storage systems as a boot disk, make sure that the LUN
has enough capacity to install the OS.
2.2.3

Setting the Selectable Boot

1
Select [Selectable Boot Settings] from the [Configuration Settings] menu and press the [Enter] key.
2
Set [Selectable Boot] to "Enabled".
3
Select a boot path (ETERNUS DX port WWN) and boot LUN#.
The boot path and boot LUN# selection window only appears when [Host Adapter BIOS] is "Enabled"
in [SAN Boot].
If [Host Adapter BIOS] is "Disabled", the boot path and boot LUN# selection window does not appear.
Instead, the window shown in
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (FCoE) for VMware
Exit Fast!UTIL
Reboot System
Return to Fast!UTIL
Step 4
Copyright 2015 FUJITSU LIMITED
Step 3
appears when [Selectable Boot Settings] is selected.
26
through
Step
10.
®
ESX
P3AM-4772-11ENZ0