Fujitsu ETERNUS DX100 S3 Setup-Handbuch - Seite 11

Blättern Sie online oder laden Sie pdf Setup-Handbuch für Lagerung Fujitsu ETERNUS DX100 S3 herunter. Fujitsu ETERNUS DX100 S3 15 Seiten. Hybrid storage systems, all-flash arrays, power synchronized unit
Auch für Fujitsu ETERNUS DX100 S3: Konfigurationshandbuch Serververbindung (12 seiten), Konfigurationshandbuch Serververbindung (12 seiten), Konfigurationshandbuch (28 seiten), Konfigurationshandbuch (13 seiten), Sicherheitsvorkehrungen (12 seiten)

Seite drucken
Fujitsu ETERNUS DX100 S3 Setup-Handbuch

RAID Configuration Settings

7
Use ETERNUS Web GUI to set RAID configurations in the ETERNUS DX.
Perform the following settings:
●
RAID group creation
●
Volume creation
●
Hot spare registration
1.
RAID group creation
Create RAID groups to create volumes.
To display the screen to create RAID groups:
Click the [RAID Group] tab, and then click [Create]
in [Action].
2.
Volume creation
Create volumes in the RAID group.
To display the screen to create volumes:
Click the [Volume] tab, and then click [Create] in
[Action].
3.
Hot spare registration
Register the hot spare for the failure of a drive.
To display the screen to register the hot spare:
Click the [Component] tab, and then click [Drives] in [Category].
Global Hot Spare registration
●
Select the drive that is to be registered as the
Global Hot Spare and click [Assign Global HS] in
[Action]. In the confirmation screen that appears,
click the [OK] button.
●
Dedicated Hot Spare registration
Select the drive that is to be registered as the
Dedicated Hot Spare and click
[Assign Dedicated HS] in [Action].
Select which RAID group to use the selected drive
as a Dedicated Hot Spare for and click the [Assign]
button. In the confirmation screen that appears,
click the [OK] button.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Setup Guide
11
Copyright 2017 FUJITSU LIMITED
P3AM-7852-06ENZ0