Fujitsu ETERNUS DX100 S3 Manuel de configuration - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Fujitsu ETERNUS DX100 S3. Fujitsu ETERNUS DX100 S3 15 pages. Hybrid storage systems, all-flash arrays, power synchronized unit
Également pour Fujitsu ETERNUS DX100 S3 : Manuel de configuration Connexion au serveur (12 pages), Manuel de configuration Connexion au serveur (12 pages), Manuel de configuration (28 pages), Manuel de configuration (13 pages), Précautions de sécurité (12 pages)

Imprimer la page
Fujitsu ETERNUS DX100 S3 Manuel de configuration

RAID Configuration Settings

7
Use ETERNUS Web GUI to set RAID configurations in the ETERNUS DX.
Perform the following settings:
●
RAID group creation
●
Volume creation
●
Hot spare registration
1.
RAID group creation
Create RAID groups to create volumes.
To display the screen to create RAID groups:
Click the [RAID Group] tab, and then click [Create]
in [Action].
2.
Volume creation
Create volumes in the RAID group.
To display the screen to create volumes:
Click the [Volume] tab, and then click [Create] in
[Action].
3.
Hot spare registration
Register the hot spare for the failure of a drive.
To display the screen to register the hot spare:
Click the [Component] tab, and then click [Drives] in [Category].
Global Hot Spare registration
●
Select the drive that is to be registered as the
Global Hot Spare and click [Assign Global HS] in
[Action]. In the confirmation screen that appears,
click the [OK] button.
●
Dedicated Hot Spare registration
Select the drive that is to be registered as the
Dedicated Hot Spare and click
[Assign Dedicated HS] in [Action].
Select which RAID group to use the selected drive
as a Dedicated Hot Spare for and click the [Assign]
button. In the confirmation screen that appears,
click the [OK] button.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Setup Guide
11
Copyright 2017 FUJITSU LIMITED
P3AM-7852-06ENZ0