Fujitsu ETERNUS DX100 S3 Setup Manual - Halaman 11

Jelajahi secara online atau unduh pdf Setup Manual untuk Penyimpanan Fujitsu ETERNUS DX100 S3. Fujitsu ETERNUS DX100 S3 15 halaman. Hybrid storage systems, all-flash arrays, power synchronized unit
Juga untuk Fujitsu ETERNUS DX100 S3: Konfigurasi Manual Koneksi Server (12 halaman), Konfigurasi Manual Koneksi Server (12 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (13 halaman), Tindakan Pencegahan Keselamatan (12 halaman)

Fujitsu ETERNUS DX100 S3 Setup Manual

RAID Configuration Settings

7
Use ETERNUS Web GUI to set RAID configurations in the ETERNUS DX.
Perform the following settings:
RAID group creation
Volume creation
Hot spare registration
1.
RAID group creation
Create RAID groups to create volumes.
To display the screen to create RAID groups:
Click the [RAID Group] tab, and then click [Create]
in [Action].
2.
Volume creation
Create volumes in the RAID group.
To display the screen to create volumes:
Click the [Volume] tab, and then click [Create] in
[Action].
3.
Hot spare registration
Register the hot spare for the failure of a drive.
To display the screen to register the hot spare:
Click the [Component] tab, and then click [Drives] in [Category].
Global Hot Spare registration
Select the drive that is to be registered as the
Global Hot Spare and click [Assign Global HS] in
[Action]. In the confirmation screen that appears,
click the [OK] button.
Dedicated Hot Spare registration
Select the drive that is to be registered as the
Dedicated Hot Spare and click
[Assign Dedicated HS] in [Action].
Select which RAID group to use the selected drive
as a Dedicated Hot Spare for and click the [Assign]
button. In the confirmation screen that appears,
click the [OK] button.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Setup Guide
11
Copyright 2017 FUJITSU LIMITED
P3AM-7852-06ENZ0