Panasonic WVNF302 - NETWORK CAMERA Installationshandbuch - Seite 22

Blättern Sie online oder laden Sie pdf Installationshandbuch für Camcorder Panasonic WVNF302 - NETWORK CAMERA herunter. Panasonic WVNF302 - NETWORK CAMERA 36 Seiten. Ip video cameras
Auch für Panasonic WVNF302 - NETWORK CAMERA: Broschüre (2 seiten), Betriebsanleitung (20 seiten), Referenz (2 seiten), Vergleichstabelle (6 seiten), Hinweis zur Integration (8 seiten), Betriebsanleitung (20 seiten)

Seite drucken
Panasonic WVNF302 - NETWORK CAMERA Installationshandbuch
Connections
Step 1
Connect the monitor cable between the mon-
itor out connector inside the dome cover and
the video in connector of the video monitor
(only when adjusting angular field of view).
Monitor out connector (for adjustment)
Important:
The monitor out connector is provided
only for checking the adjustment of the
angular field of view on the video monitor
when installing the camera or when serv-
icing.
It is not provided for recording/ monitor-
ing use.
Step 2
Connect a power cord from a power supply.
12 V DC power terminal
22
• When using 12 V DC power supply
q Remove 3 mm – 7 mm {1/8" – 5/32"} of
the outer jacket of the power cord from a
12 V DC power supply and twist the core
of the power cord to prevent a short cir-
cuit.
Approx. 3 mm - 7 mm {1/8" - 5/32"}
Specification of cable (wire):
AWG #16 - #28 Single core, twisted
w Loosen the screws of the provided power
cord plug and insert the power cords into
the power cord plug until the exposed
core wires are completely hidden.
e Tighten the screws to fix the inserted
power cords.
* Make sure that the exposed core wires
are completely hidden after tightening
the screws.
@
Power cord plug
(provided as a
standard accessory)
r Insert the power cord plug to the power
cord terminals on the mounting side of
the camera.
* Make sure that the power cord plug is
inserted to the power cord terminal firm-
ly.
!