Panasonic WVNF302 - NETWORK CAMERA Manuale di installazione - Pagina 22

Sfoglia online o scarica il pdf Manuale di installazione per Videocamera Panasonic WVNF302 - NETWORK CAMERA. Panasonic WVNF302 - NETWORK CAMERA 36. Ip video cameras
Anche per Panasonic WVNF302 - NETWORK CAMERA: Opuscolo (2 pagine), Manuale di istruzioni per l'uso (20 pagine), Riferimento (2 pagine), Tabella di confronto (6 pagine), Nota di integrazione (8 pagine), Manuale di istruzioni per l'uso (20 pagine)

Connections

Step 1

Connect the monitor cable between the mon-

itor out connector inside the dome cover and

the video in connector of the video monitor

(only when adjusting angular field of view).

Monitor out connector (for adjustment)

Important:

The monitor out connector is provided

only for checking the adjustment of the

angular field of view on the video monitor

when installing the camera or when serv-

icing.

It is not provided for recording/ monitor-

ing use.

Step 2

Connect a power cord from a power supply.

12 V DC power terminal

• When using 12 V DC power supply

q Remove 3 mm – 7 mm {1/8" – 5/32"} of

the outer jacket of the power cord from a

12 V DC power supply and twist the core

of the power cord to prevent a short cir-

cuit.

Approx. 3 mm - 7 mm {1/8" - 5/32"}

Specification of cable (wire):

AWG #16 - #28 Single core, twisted

w Loosen the screws of the provided power

cord plug and insert the power cords into

the power cord plug until the exposed

core wires are completely hidden.

e Tighten the screws to fix the inserted

power cords.

* Make sure that the exposed core wires

are completely hidden after tightening

the screws.

Power cord plug

(provided as a

standard accessory)

r Insert the power cord plug to the power

cord terminals on the mounting side of

the camera.

* Make sure that the power cord plug is

inserted to the power cord terminal firm-

ly.