Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Handbuch zur Fehlersuche - Seite 8

Blättern Sie online oder laden Sie pdf Handbuch zur Fehlersuche für Schalter Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion herunter. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 11 Seiten. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Auch für Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion: Hinweis zur Installation (14 seiten), Lösungshandbuch (17 seiten), Hinweis zur Installation (46 seiten), Weißbuch (19 seiten), Beschreibung (1 seiten), Produkt-Bulletin (6 seiten), Hinweis (4 seiten), Datenblatt (9 seiten), Datenblatt (18 seiten), Weißbuch (18 seiten), Konfigurationshandbuch (8 seiten), Hinweis zur Installation (28 seiten), Hinweis zur Installation (18 seiten), Benutzerhandbuch (17 seiten), Hinweis zur Installation (24 seiten), Handbuch (19 seiten), Hinweis zur Installation (36 seiten)

MWAM System Error Messages

Error Message

NVRAM Error Messages

Error Message %MWAM_NVRAM-3-ERR:

Error Message MWAM_NVRAM-5-INFO: "%s"

Error Message %MWAM_NVRAM-5-KRUSTY_NVRAM_NOT_FOUND:

Error Message %MWAM_FUR-3-ERR: "%s\n"

Multiprocessor WAN Application Module User Guide

B-8

MWAM_FLASH-3-FLASH_LOCKED_BY_OTHER_CPU: "%s"

Explanation

The other CPU within this complex is programming the shared flash, flash

programming must complete before proceeding with reload

Recommended Action

Wait for the other CPU to complete its flash programming operation, then

reenter the CLI command.

An error occurred while saving/erasing the configuration from flash.

Explanation

Copy the error message exactly as it appears, and report it to your technical

Recommended Action

support representative.

Information showing the state of the NVRAM configuration in the BootFlash.

Explanation

If this message recurs, copy the error message exactly as it appears on the

Recommended Action

console or in the system log. Research and attempt to resolve the error using the Output Interpreter

"OUTPUT_INTERPRETER." Also perform a search of the Bug Toolkit "BUG_TOOLKIT." If you

still require assistance, open a case with the Technical Assistance Center via the Internet

"TAC_CASE_OPEN," or contact your Cisco technical support representative and provide the

representative with the gathered information.

Information indicating there is no NVRAM pointer.

Explanation

Recommended Action

This indicates either NVRAM has not initialized properly, or it is corrupted.

An error occurred while upgrading or invalidating the Field-Upgradeable ROMMON.

Explanation

Copy the error message exactly as it appears, and report it to your technical

Recommended Action

support representative.

"%s"

Appendix B

Troubleshooting

OL-7469-04