Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Instrukcja rozwiązywania problemów - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja rozwiązywania problemów dla Przełącznik Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 11 stron. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Również dla Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion: Uwaga dotycząca instalacji (14 strony), Podręcznik rozwiązań (17 strony), Uwaga dotycząca instalacji (46 strony), Biała księga (19 strony), Opis (1 strony), Biuletyn produktu (6 strony), Zawiadomienie (4 strony), Arkusz danych (9 strony), Arkusz danych (18 strony), Biała księga (18 strony), Podręcznik konfiguracji (8 strony), Uwaga dotycząca instalacji (28 strony), Uwaga dotycząca instalacji (18 strony), Podręcznik użytkownika (17 strony), Uwaga dotycząca instalacji (24 strony), Podręcznik (19 strony), Uwaga dotycząca instalacji (36 strony)

MWAM System Error Messages

Error Message

NVRAM Error Messages

Error Message %MWAM_NVRAM-3-ERR:

Error Message MWAM_NVRAM-5-INFO: "%s"

Error Message %MWAM_NVRAM-5-KRUSTY_NVRAM_NOT_FOUND:

Error Message %MWAM_FUR-3-ERR: "%s\n"

Multiprocessor WAN Application Module User Guide

B-8

MWAM_FLASH-3-FLASH_LOCKED_BY_OTHER_CPU: "%s"

Explanation

The other CPU within this complex is programming the shared flash, flash

programming must complete before proceeding with reload

Recommended Action

Wait for the other CPU to complete its flash programming operation, then

reenter the CLI command.

An error occurred while saving/erasing the configuration from flash.

Explanation

Copy the error message exactly as it appears, and report it to your technical

Recommended Action

support representative.

Information showing the state of the NVRAM configuration in the BootFlash.

Explanation

If this message recurs, copy the error message exactly as it appears on the

Recommended Action

console or in the system log. Research and attempt to resolve the error using the Output Interpreter

"OUTPUT_INTERPRETER." Also perform a search of the Bug Toolkit "BUG_TOOLKIT." If you

still require assistance, open a case with the Technical Assistance Center via the Internet

"TAC_CASE_OPEN," or contact your Cisco technical support representative and provide the

representative with the gathered information.

Information indicating there is no NVRAM pointer.

Explanation

Recommended Action

This indicates either NVRAM has not initialized properly, or it is corrupted.

An error occurred while upgrading or invalidating the Field-Upgradeable ROMMON.

Explanation

Copy the error message exactly as it appears, and report it to your technical

Recommended Action

support representative.

"%s"

Appendix B

Troubleshooting

OL-7469-04