Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 문제 해결 매뉴얼 - 페이지 8

{카테고리_이름} Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 11 페이지. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion에 대해서도 마찬가지입니다: 설치 참고 사항 (14 페이지), 솔루션 매뉴얼 (17 페이지), 설치 참고 사항 (46 페이지), 백서 (19 페이지), 설명 (1 페이지), 제품 게시판 (6 페이지), 공지 사항 (4 페이지), 데이터시트 (9 페이지), 데이터시트 (18 페이지), 백서 (18 페이지), 구성 매뉴얼 (8 페이지), 설치 참고 사항 (28 페이지), 설치 참고 사항 (18 페이지), 사용자 설명서 (17 페이지), 설치 참고 사항 (24 페이지), 매뉴얼 (19 페이지), 설치 참고 사항 (36 페이지)

페이지 인쇄
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 문제 해결 매뉴얼
MWAM System Error Messages
Error Message

NVRAM Error Messages

Error Message %MWAM_NVRAM-3-ERR:
Error Message MWAM_NVRAM-5-INFO: "%s"
Error Message %MWAM_NVRAM-5-KRUSTY_NVRAM_NOT_FOUND:

FUR Error Messages

Error Message %MWAM_FUR-3-ERR: "%s\n"
Multiprocessor WAN Application Module User Guide
B-8
MWAM_FLASH-3-FLASH_LOCKED_BY_OTHER_CPU: "%s"
Explanation
The other CPU within this complex is programming the shared flash, flash
programming must complete before proceeding with reload
Recommended Action
Wait for the other CPU to complete its flash programming operation, then
reenter the CLI command.
An error occurred while saving/erasing the configuration from flash.
Explanation
Copy the error message exactly as it appears, and report it to your technical
Recommended Action
support representative.
Information showing the state of the NVRAM configuration in the BootFlash.
Explanation
If this message recurs, copy the error message exactly as it appears on the
Recommended Action
console or in the system log. Research and attempt to resolve the error using the Output Interpreter
"OUTPUT_INTERPRETER." Also perform a search of the Bug Toolkit "BUG_TOOLKIT." If you
still require assistance, open a case with the Technical Assistance Center via the Internet
"TAC_CASE_OPEN," or contact your Cisco technical support representative and provide the
representative with the gathered information.
Information indicating there is no NVRAM pointer.
Explanation
Recommended Action
This indicates either NVRAM has not initialized properly, or it is corrupted.
An error occurred while upgrading or invalidating the Field-Upgradeable ROMMON.
Explanation
Copy the error message exactly as it appears, and report it to your technical
Recommended Action
support representative.
"%s"
"%s"
Appendix B
Troubleshooting
OL-7469-04