Cisco Nexus 9000 Series Konfigurationshandbuch - Seite 18

Blättern Sie online oder laden Sie pdf Konfigurationshandbuch für Netzwerk-Router Cisco Nexus 9000 Series herunter. Cisco Nexus 9000 Series 32 Seiten. Switch chassis
Auch für Cisco Nexus 9000 Series: Schnellstart-Konfigurationshandbuch (6 seiten), Konfigurationshandbuch (32 seiten), Handbuch (30 seiten), Installationshandbuch (12 seiten), Installation von (8 seiten), Schnellstart-Handbuch (14 seiten), Handbuch (16 seiten)

Configuring a Device Group

SUMMARY STEPS

1. configure terminal

2. catena vlan-group vlan-group-name

3. vlan vlan-range

4. (Optional) copy running-config startup-config

DETAILED STEPS

Command or Action

Step 1

configure terminal

Example:

switch# configure terminal

switch(config)#

Step 2

catena vlan-group vlan-group-name

Example:

switch(config)# catena vlan-group vg1

Step 3

vlan vlan-range

Example:

switch(config-vlan-group)# vlan 10

switch(config-vlan-group)# vlan 20

switch(config-vlan-group)# vlan 30-40

switch(config-vlan-group)# vlan 50,55

Step 4

copy running-config startup-config

Example:

switch(config)# copy running-config startup-config

Configuring a Device Group

A device group contains a list of node IP addresses. If you are creating a Layer 3 routed mode deployment

you must create a device group.

To create and configure a device group:

Note

If there are multiple nodes, then traffic is load balanced accordingly.

Cisco Nexus 9000 Series NX-OS Catena Configuration Guide, Release 7.x

Configuring the Catena Solution

Purpose

Enters global configuration mode.

Creates a catena VLAN group, and enters VLAN

configuration mode.

Assign a VLAN to the configured VLAN group.

Repeat this step to specify all VLANs.

(Optional)

Copies the running configuration to the startup

configuration.