Cisco Nexus 9000 Series Yapılandırma Kılavuzu - Sayfa 18

Ağ Yönlendiricisi Cisco Nexus 9000 Series için çevrimiçi göz atın veya pdf Yapılandırma Kılavuzu indirin. Cisco Nexus 9000 Series 32 sayfaları. Switch chassis
Ayrıca Cisco Nexus 9000 Series için: Hızlı Başlangıç Yapılandırma Kılavuzu (6 sayfalar), Yapılandırma Kılavuzu (32 sayfalar), Manuel (30 sayfalar), Kurulum Kılavuzu (12 sayfalar), Yükleme (8 sayfalar), Hızlı Başlangıç Kılavuzu (14 sayfalar), Manuel (16 sayfalar)

Configuring a Device Group

SUMMARY STEPS

1. configure terminal

2. catena vlan-group vlan-group-name

3. vlan vlan-range

4. (Optional) copy running-config startup-config

DETAILED STEPS

Command or Action

Step 1

configure terminal

Example:

switch# configure terminal

switch(config)#

Step 2

catena vlan-group vlan-group-name

Example:

switch(config)# catena vlan-group vg1

Step 3

vlan vlan-range

Example:

switch(config-vlan-group)# vlan 10

switch(config-vlan-group)# vlan 20

switch(config-vlan-group)# vlan 30-40

switch(config-vlan-group)# vlan 50,55

Step 4

copy running-config startup-config

Example:

switch(config)# copy running-config startup-config

Configuring a Device Group

A device group contains a list of node IP addresses. If you are creating a Layer 3 routed mode deployment

you must create a device group.

To create and configure a device group:

Note

If there are multiple nodes, then traffic is load balanced accordingly.

Cisco Nexus 9000 Series NX-OS Catena Configuration Guide, Release 7.x

Configuring the Catena Solution

Purpose

Enters global configuration mode.

Creates a catena VLAN group, and enters VLAN

configuration mode.

Assign a VLAN to the configured VLAN group.

Repeat this step to specify all VLANs.

(Optional)

Copies the running configuration to the startup

configuration.