Cisco Nexus 9000 Series Panduan Konfigurasi - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Router Jaringan Cisco Nexus 9000 Series. Cisco Nexus 9000 Series 32 halaman. Switch chassis
Juga untuk Cisco Nexus 9000 Series: Panduan Konfigurasi Mulai Cepat (6 halaman), Panduan Konfigurasi (32 halaman), Manual (30 halaman), Panduan Instalasi (12 halaman), Menginstal (8 halaman), Panduan Memulai Cepat (14 halaman), Manual (16 halaman)

Configuring a Device Group

SUMMARY STEPS

1. configure terminal

2. catena vlan-group vlan-group-name

3. vlan vlan-range

4. (Optional) copy running-config startup-config

DETAILED STEPS

Command or Action

Step 1

configure terminal

Example:

switch# configure terminal

switch(config)#

Step 2

catena vlan-group vlan-group-name

Example:

switch(config)# catena vlan-group vg1

Step 3

vlan vlan-range

Example:

switch(config-vlan-group)# vlan 10

switch(config-vlan-group)# vlan 20

switch(config-vlan-group)# vlan 30-40

switch(config-vlan-group)# vlan 50,55

Step 4

copy running-config startup-config

Example:

switch(config)# copy running-config startup-config

Configuring a Device Group

A device group contains a list of node IP addresses. If you are creating a Layer 3 routed mode deployment

you must create a device group.

To create and configure a device group:

Note

If there are multiple nodes, then traffic is load balanced accordingly.

Cisco Nexus 9000 Series NX-OS Catena Configuration Guide, Release 7.x

Configuring the Catena Solution

Purpose

Enters global configuration mode.

Creates a catena VLAN group, and enters VLAN

configuration mode.

Assign a VLAN to the configured VLAN group.

Repeat this step to specify all VLANs.

(Optional)

Copies the running configuration to the startup

configuration.