Cisco Nexus 9000 Series 구성 매뉴얼 - 페이지 18
{카테고리_이름} Cisco Nexus 9000 Series에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Nexus 9000 Series 32 페이지. Switch chassis
Cisco Nexus 9000 Series에 대해서도 마찬가지입니다: 빠른 시작 구성 매뉴얼 (6 페이지), 구성 매뉴얼 (32 페이지), 매뉴얼 (30 페이지), 설치 매뉴얼 (12 페이지), 설치 (8 페이지), 빠른 시작 매뉴얼 (14 페이지), 매뉴얼 (16 페이지)
페이지 인쇄
Configuring a Device Group
SUMMARY STEPS
1. configure terminal
2. catena vlan-group vlan-group-name
3. vlan vlan-range
4. (Optional) copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2
catena vlan-group vlan-group-name
Example:
switch(config)# catena vlan-group vg1
Step 3
vlan vlan-range
Example:
switch(config-vlan-group)# vlan 10
switch(config-vlan-group)# vlan 20
switch(config-vlan-group)# vlan 30-40
switch(config-vlan-group)# vlan 50,55
Step 4
copy running-config startup-config
Example:
switch(config)# copy running-config startup-config
Configuring a Device Group
A device group contains a list of node IP addresses. If you are creating a Layer 3 routed mode deployment
you must create a device group.
To create and configure a device group:
Note
If there are multiple nodes, then traffic is load balanced accordingly.
Cisco Nexus 9000 Series NX-OS Catena Configuration Guide, Release 7.x
10
Configuring the Catena Solution
Purpose
Enters global configuration mode.
Creates a catena VLAN group, and enters VLAN
configuration mode.
Assign a VLAN to the configured VLAN group.
Repeat this step to specify all VLANs.
(Optional)
Copies the running configuration to the startup
configuration.